Instructions

Installing LED lights:

 

Connecting LED lights:

 

LED Lights Connectors:

 

 

•  Ensure your light strips work well.
•  Cut along the suggested line of the LED strip evenly.
• when used for waterproof LED strips, please strip the silicone on the contact area (about 0.25inch).
• Align the "+" on the light strip with the side with the cover on the connector. Ignore the RGB/BGR labels, which are irrelevant.
• Slide the LED strips to the connector from the slots on the connector sides.
• Make sure that each metal pin on the connector is pressed above the brass contact point of the light strip.
•  Turn on the power to make sure that each LED is working. Then close the lids of connectors.